User Authorisations; Start Menu - oventrop Regumaq X-45 Operating Instructions Manual

Regumaq X-45
Operation
8.3

User authorisations

Settings can be made at three different authorisation levels.
When setting ranges are defined, the setting options adapt to the restricted setting ranges.
Example: If you limit the hot water setting range to 50 °C to 60 °C, the hot water temperature can only be selected from this
range.
The "user" (standard user) does not need a PIN.
1
Open the main menu (see par. 8.2 on page 33).
2
If you want to log in as an "Installer" or as a "Special functions" user, scroll all the way to the right with the touch key " " to
the menu item "User code".
3
Select "OK".
4
Select the respective figure with the touch keys " " and
5
Confirm your entries in each case with "OK".
Z
If the PIN has been entered correctly, a green ring appears on the touch control panel instead of a blue ring.
8.3.1

Start menu

After the initial commissioning, the product first queries various basic settings.
Controller presettings are provided at the factory for use in different system combinations (see par. 8.4 on page
40). To keep the effort for specific settings low, you have the option at this point to activate preloaded default set-
tings..
This menu only appears after the initial commissioning and if you have reset the station to factory settings.
P P P
P P P
P P P
P P
P P P
34
Language
Time
Date
Controller presetting
Save
" ".
Parameter
EN, DE, FR, NL, IT, ES, RU, BG, RO
Hour, Min
Day, Month, Year
Here you have the option of activating preloaded default settings.
0
1- 5
Yes, No
Activate no presetting
Activate presetting (see par. 8.4
on page 40)
138114082-V04.04.2022