Table of Contents
Advertisement
Regumaq X-45
Operation
Fig. 30:
Mounting position
1
Recess for operation position
2
Recess for mounting position
Fig. 31:
Opening of the controller
1
Connection panel cover
2
Hexagon socket screw
3
Supply line cover
138114082-V04.04.2022
4
Loosen the screw (position
and put it aside.
5
Slide the connection panel cover (position
on page 45) upwards beyond the catches.
6
Insert the microSD card into the card slot.
7
Slide the connection panel cover downwards.
8
Close the casing with the screw.
9
Fix the controller in the operation position.
Make sure that the lines are positioned correctly
(see Fig. 25 on page 31).
10
Put on the upper shell.
11
Establish the power supply.
1
Z
The fresh water station is ready for operation.
2
8.11.2 Updating the fi rmware on the controller
1
Insert a microSD card containing the fi rmware update
software into the microSD card slot as described in par.
8.11.1 on page 44.
The controller only recognises fi rmware updates
if they are saved in a folder "RQ" on the top level
of the microSD card.
f
2
To start the update, select the menu item "Update" in
the "Basic settings" menu.
3
Confi rm the safety query with "Yes".
Z
During the update process, "Firmware update in
progress" is displayed. This process takes about 5
minutes. After the update, the controller restarts and
the fi rmware version is displayed during the boot
process.
8.11.3 Start of recording
f
Insert the microSD card into the card slot as described
in par. 8.11.1 on page 44.
Recording starts immediately. The oldest data on
the card is overwritten as soon as the capacity
limit is reached.
The possible recording time depends on the ca-
1
pacity of the data carrier and the complexity of
the data to be saved.
2
3
2
in Fig. 31 on page 45)
Create a directory "RQ" on the microSD card in
advance and extract the contents of the ZIP fi le into
this directory.
1
in Fig. 31
45
Advertisement
Chapters
Table of Contents
