Table of Contents
Advertisement
Regumaq X-45
Operation
8.10 Basic settings
In the "Basic settings" menu, all basic parameters for the
station can be set.
8.11 MicroSD card slot
The controller has a microSD card slot for commercially
available microSD cards with a capacity of up to 8 GB.
The following functions can be performed with a microSD
card:
•
Recording of measured and balance values. After
transfer to a computer, the saved values can be
opened and visualised with a spreadsheet programme,
for example.
•
Updating the fi rmware on the controller.
•
Loading and saving of controller settings.
8.11.1 Insertion of the microSD card
DANGER
Danger to life due to electric current!
There is a danger to life if live components are
touched.
!
Disconnect the product from the power supply
at all poles.
!
Check that no voltage is present.
!
Secure the product against being switching
back on again.
!
Only install the product in dry indoor areas.
NOTICE
Damage to electronic components due to
electrostatic discharge!
!
Before touching the inside of the casing,
ensure that the potentials are equalised by
taking suitable measures. Touch an earthed
component. This can be a water tap or a
radiator, for example..
The controller holder in the lower shell is designed in such
a way that you can easily fi x the controller in a comfortable
mounting position without tools.
1
Lift off the upper shell.
2
Carefully pull the controller off the lower shell as
shown in Fig. 29 on page 44.
44
NOTICE
Damage to the electrical lines and connections
due to tensile forces!
Electrical lines or connections can break if
excessive tensile forces are applied.
!
Make sure that the cables connected to the
controller are not subjected to strain.
Fig. 29:
Removal of the controller from the lower shell
3
Turn the controller and fi x it in the mounting position
as shown in Fig. 30 on page 45.
138114082-V04.04.2022
Advertisement
Chapters
Table of Contents
