oventrop Regumaq X-45 Operating Instructions Manual page 71

Date:
Installation location address / building
Address operator
Address installation company
Regumaq X-45 serial number
Give reasons for items that have not
been carried out or for items that have
been answered with No in the Remarks
field!
Installation of potable water station
1 Number of installed stations
2 Number of stations with circulation
3 Designation of the circulation
pump(s) if you do not use the Oven-
trop circulation set
4 When installing several stations
4.1 Has the piping been carried out ac-
cording to Tichelmann?
4.2 Have check valves been installed in
the potable water supply pipe
(PWC)?
5 Has an additional safety valve of
sufficient dimension been installed
in the potable water circuit?
6 System pressure on the potable wa-
ter side
7 Has an expansion tank been in-
stalled in the potable water circuit?
8 System pressure on the storage cyl-
inder side
9 Has the storage cylinder side been
vented?
10 Has/have the air vent(s) been
checked for function?
11 Capacity, type and version of the
heat generator
12 Storage cylinder volume
13 Has/have the station(s) been hy-
draulically decoupled?
14 When using Oventrop storage cylin-
ders. Has/have the station(s) been
connected according to specifica-
tions?
15 Has an expansion tank of sufficient
dimension been installed in the
storage cylinder circuit?
Fresh water station Regumaq X-45
Tick as appropriate or en-
ter value/number
Yes No
¨ ¨
¨ ¨
¨ ¨
bar
¨ ¨
bar
¨ ¨
¨ ¨
kW
¨ ¨
¨ ¨
¨ ¨
Handover report
Remarks / Settings
l