Fayat Group DYNAPAC F2500C Application, Operation & Maintenance page 93

Table of Contents

Advertisement

Item Designation
10
Lights
Emergency stop
11
button
Engine speed
12
adjuster
Straight-ahead
13
travel synchronisa-
tion
Brief description
Lights up instrument panel A/B when the parking light
is switched on
Press in an emergency (danger to persons, impending colli-
sion, etc.)!
-
Pressing the emergency stop button switches off the en-
gine, the drives and the steering system.
Making way, lifting the screed or other actions are then no
longer possible! Danger of accidents!
-
The emergency stop button does not shut off the gas heat-
er system.
Close the main shut-off valve and the valves on the bottles
by hand!
-
To restart the engine, the button must be pulled out again.
Continuously variable engine speed setting
(if drive lever is extended).
Min. setting: Idling speed
Max. position: Nominal speed
For paving, select the rated speed; reduce the speed
A
for transportation.
The automatic speed control keeps the set speed con-
A
stant even under a load.
Using this potentiometer, both chains can be synchronised for
straight-ahead travel while driving:
-
Set the steering to position "0"; then adjust the potentiom-
eter until the paver finisher is travelling straight ahead.
This function is only active if the vehicle is not
A
equipped with automatic synchronisation or the auto-
matic synchronisation system is defective.
D 10 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac f2500cs

Table of Contents