Table of Contents
Advertisement
4
Offsetting the screed
Depending on the paving condition re-
quirements, the crossbeam can be
moved backwards or forwards.
This adjustment enlarges the material
space between the auger and screed.
- Loosen the four mounting screws (1).
- Remove the screws and move the ve-
hicle forwards.
- The crossbeam remains in its position
on slide rails: now tighten the
screws (1) back down.
When paving thin layers, the material
A
can "settle" in front of the screed if the
screed is set to the rear position. When
paving thick layers, the screed then climbs better.
1
E 10 25
Advertisement
Table of Contents
