Table of Contents
Advertisement
3.5
Preparing the vehicle
4
2
After the vehicle has been positioned on the low-loader, the following preparations
must be carried out:
- For movable platform: Set the retaining bolt properly (1).
- Close the hopper and set the hopper transport safeguards (2) on both sides.
- Position the non-slip mats under the screed across the whole width of the
vehicle (3) and lower the screed.
- Switch off the paver finisher.
- Attach and secure the protective hood (4) to the operating panel.
- Lower the roof and set the latches (5) properly on both sides (see Section entitled
"Protective roof").
- Fold up the walkway plates of the screed and fasten on both sides using lashing
straps (6) and any possibly existing hook springs (7).
C 10 10
1
3
5
6
7
Advertisement
Table of Contents
