Table of Contents
Advertisement
Driving and stopping the paver finisher
- Set the travel drive to the desired speed level, fast/slow (1).
- Upper switch position: transport speed (hare)
- Lower switch position: operating speed (tortoise)
- Turn the travel drive preselector (2) to medium speed.
- For driving, carefully tilt the drive lever (3) forward or backward according to the
drive direction desired.
- Adjust the speed with the preselector (2).
- Carry out steering movements by actuating the steering potentiometer (4).
f
In emergency situations, press the emergency stop button (5)!
- To stop, set the preselector (2) to "0" and move the drive lever (3) into its
centre position.
D 40 17
Advertisement
Table of Contents
