Table of Contents
Advertisement
Item Designation
Battery charge in-
77
dicator (red)
78
Not used
Error message
79
(yellow)
80
Not used
81
Start inhibit
Indicator lamp
82
Hydraulic oil
temperature
83
Not used
Brief description
Must go out after starting when the engine revs up.
-
If the light does not go out, switch off the engine
Indicates that there is a drive engine fault. Depending on the
type of fault, the vehicle can temporarily continue to be operat-
ed or, in the case of serious faults, should be shut down im-
mediately to prevent further damage from occurring.
Each fault should be rectified as soon as possible!
The error code can be called up using the switch
A
"Call up error / malfunction".
Lights up for a few seconds once the ignition has been
A
switched on for checking purposes.
Indicates that an enabled function stops the machine
from starting.
m
Lights up if the hydraulic oil temperature is too high.
Stop the paver finisher when if the temperature is too
high (drive lever in centre position), let the engine cool
down while idling. Determine the cause and correct it
if necessary.
D 10 33
Advertisement
Table of Contents
