Fayat Group DYNAPAC F2500C Application, Operation & Maintenance page 374

Table of Contents

Advertisement

1.2
Maintenance points
Batteries (1)
Maintenance of batteries
The batteries are factory-filled with the
A
correct quantity of acid. The fluid level
should come up to the top mark. If re-
quired, top up the battery, but only use
distilled water to do so!
m
The battery terminal clamps must be
free of oxide and protected with a special
terminal grease.
m
When removing the batteries, always
first remove the negative terminal, en-
suring that the battery terminals cannot
be short circuited.
Keep the battery surfaces clean and dry,
A
use only a damp or antistatic cloth
for cleaning.
m
Do not open batteries without plugs!
If the starting capacity is insufficient,
A
check and possible recharge the batteries.
Regularly check the charge of the battery and recharge if necessary.
A
F 80 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac f2500cs

Table of Contents