Table of Contents
Advertisement
Mounting and aligning the sensors
- Insert the sensor mounting (1) into the
bracket (2).
- Align the sensor and secure with the
relevant star handle bolts.
- The sensing height can be adjusted
by
loosening
bolts (3).
At the two outer sensor brackets, the
A
sensor can also be mounted on the swiv-
elling sensor extension arm (4).
This therefore enables the two outer
sensors to be swivelled during paving for
diverse requirements, e.g. cornering.
- By
loosening
bolts (5), the length of the extension
arm can be adjusted.
- The sensor bracket with extension arm can be swivelled by loosening the star
handle bolts (3).
If a sensor extension arm is swivelled to the side, it must be ensured that the attached
A
sensor is subsequently aligned in the direction of travel.
All assembly parts must be mounted and tightened properly to ensure safe and pre-
A
cise operation of the big ski!
E 10 36
the
star
handle
the
star
handle
4
5
2
1
MBS8.bmp
3
Advertisement
Table of Contents
