Table of Contents
Advertisement
A hand pump (5) is located in the engine compartment (left side); it must be actuated
A
to be able to tow the machine.
Pressure for releasing the traction system brakes is built up with the hand pump.
- Push knob (6) into the valve body.
While pumping (next step), check
that the knob remains in the pressed
position.
- Actuate lever (7) of hand pump until
sufficient pressure has been built up
and traction system brakes have been
released.
m
On completion of the towing process, re-
store the initial status.
m
Only release the traction system brakes
when the machine is sufficiently secured
against accidental rolling or is already
properly connected to the towing vehicle.
- Attach the tow bar to the coupling (9)
located in the bumper.
Now carefully and slowly tow the paver
A
finisher out of the construction area.
Only ever tow the shortest distance to
m
the means of transport or the next park-
ing possibility.
m
The max. permissible towing speed
is 10 m/min!
In hazardous situations, a towing speed of
15 m/min is only permitted temporarily.
m
The max. permissible towing eye (9)
load is: 200 kN
C 10 24
6
9
5
7
Advertisement
Table of Contents
