Table of Contents
Advertisement
The protective roof can be raised and
lowered electrically.
The exhaust pipe is lowered or raised to-
A
gether with the roof.
- Tighten bolts (1) on both sides of
the roof.
- Operate the switch (2) until the roof
has reached the upper or lower limit
position.
- Set bolts (1) in the respective position
on both sides of the roof.
f
There must not be anyone on the control
platform on actuation!
WARNING
1
Danger of crushing due to moving vehicle parts
Vehicle parts performing movements can cause severe
or fatal injuries!
- Remaining in the vehicle's danger zone during operation
is prohibited!
- Do not reach into the danger zone.
- Comply with the warning and information signs
on the vehicle.
- Comply with all further information in these instructions
and in the safety manual.
2
D 30 3
Advertisement
Table of Contents
