Transport; Storage - Kessel NS 3 Installation And Operating Instructions Manual

Transportation of the KESSEL separator should be handled
only by a transporter who has the proper knowledge, equipment
and employees to handle such a product. During transport the
separator must be firmly fixed into position and must not be al-
lowed to move or shift in place. It also must be protected from
other objects coming in contact with the separator during trans-
port.
If and when the separator is lifted it is important to follow the fol-
lowing correct procedures: The separator is not to be lifted with
the use of steel cables or chains. Proper equipment are heavy
duty cloth or hemp straps designed to handle the corresponding
loads. The separator should be lifted by placing the proper
straps beneath the inlet and outlet of the separator as seen in
the illustration. Do not lift the separator by the small holes bet-
ween the two manholes covers as illustrated on this page. In in-
stances where a forklift is used, secure the separator to the for-
klift with appropriate cloth / hemp securing straps.
4. Transport and Storage
33

Storage

In cases where the separator needs to be temporarily stored
before installation, it is important that the separator is placed on
firm level ground and in an area where it is protected from co-
ming in contact with other objects. Storing the separator outdo-
ors will not cause any problems.