Table of Contents
Advertisement
Raise the unit to the transport position and secure with the retaining pins before traveling on
public roads and when storing.
Hopper contents, which may exceed hundred pounds, could fall and crush a person
resulting in possible injury or death. Use extrem care when handling or working on or in
load hopper bin.
Use only power units equipped with ROPS Cabs with the windows in good condition when
operating this implement. Rocks can be thrown forward or backward by this Rake. Rocks
thrown toward the power unit operator can result in possible injury or death.
CONNECTING OR DISCONNECTING IMPLEMENT INSTRUCTIONS AND
PRACTICES
When connecting implement to power unit hitch, DO NOT ALLOW BYSTANDERS between
power unit and implement. Keep bystanders clear of are.
Always shut the Power Unit completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement.
TRANSPORTING SAFETY INSTRUCTIONS AND PRACTICES
Be particularly careful when transporting the Implement with the Power Unit. Turn curves or
go up hills only at a low speed and using a gradual steering angle. Front mounted
implements move the center of gravity to the front and remove weight from the rear wheels.
Make certain, by adding ballast, that at least 20% of the power unit's weight is on the rear
wheels to prevent tipping, loss of steering control possible injury. Slow down on rough or
uneven surfaces to prevent loss of steering control which could result in property damage or
possible injury
Make certain that the "Slow Moving Vehicle" (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local
traffic regulations.
SMR-600 04/21
© 2019 Alamo Group Inc.
SAFETY
(STL-16)
(STL-22)
(SG-6)
Safety Section 1-9
Advertisement
Table of Contents
