Motor; Auxiliary Hydraulics; Electrical Controls - Schulte SMR-600 Operator's Manual

Multi-rake

Table of Contents

2.5 Motor

Check with your local Schulte dealer or the factory

to ensure that you have the correct size hydraulic

motor for your make and model of skid steer to

hitch the SMR-600.

Refer to the SMR-600 Parts Manual for skid steer

motor mount.

The skid steer must be equipped with Front

Auxiliary Hydraulics. The hydraulic output capacity

of the skid steer must match the equipped

implement drive motor.

operator's manual to determine the hydraulic output

specifications of the skid steer.

Do not operate this Equipment with hydraulic oil or fuel leaking. Oil

and fuel are explosive and their presence could present a hazard. Do

not check for leaks with your hand! High-pressure oil streams from

breaks in the line could penetrate the skin and cause tissue damage

including gangrene. To check for a hose leak, SHUT the unit ENGINE

OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,

safety glasses and use cardboard to check for evidence of oil leaks. If

you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.

If oil does penetrate the skin, have the injury treated immediately by a

physician knowledgeable and skilled in this procedure.

This machine is equipped with an electronically controlled valve block. Check to make sure the electrical

harness ordered is the correct one to match your model of skid steer. If the skid steer is not equipped with

electronic joystick controls, or is a type that does not have a harness offered, the machine will be controlled

with the switch box outlined in the assembly section of this manual.

SMR-600 04/21

OPERATION

Reference the skid steer

Operation Section 4-5

(SG-15)

Table of Contents