Table of Contents
Advertisement
Implement ID#________________________
Date:________________________________
Make:_______________________________
Shift: _______________________________
Before conducting the inspection, make sure the skid steer engine is off, all
rotation has stopped and the skid steer is in park with the parking brake
engaged. Make sure the implement is resting on the ground or securely
blocked up and all hydraulic pressure has been relieved.
The flashing lights function properly
The SMV Sign is clean and visible
The tires are in good condition with proper pressure
The wheel lug bolts are tight
The brakes are in good condition
The steering linkage is in good condition
There are no visible oil leaks
The hydraulic controls function properly
The ROPS or ROPS Cab is in good condition
The seatbelt is in place and in good condition
The engine oil level is full
The hydraulic oil level is adequate
The fuel level is adequate
The engine coolant fluid level is full
The radiator is free of debris
The air filter is in good condition
Park brake is in working order
The brake fluid level is full
Back-up alarm works if applicable
Operator's Signature:
DO NOT OPERATE an UNSAFE SKID STEER or IMPLEMENT
SMR-600 04/21
© 2019 Alamo Group Inc.
OPERATION
Skid Steer PRE-OPERATION Inspection
Item
Operation Section 4-13
Condition at
Specific Comments if
Start of Shift
not O.K.
Advertisement
Table of Contents
