(10.5) Shutting Down The Implement; Disconnecting The Windrower From The Tractor - Schulte SRW800 Operator’s Manual With Parts Listing

10.5 Shutting Down the Implement
To shut down the implement, first bring the tractor to a
complete stop. Then slow down the windrower by
reducing the engine speed before disengaging the PTO.
Wait for all rotating motion to stop before proceeding
to drive or shut down the tractor.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the parking
brake, lower the attached implement to the ground,
shut down the engine, remove the key, and wait for all
motion to come to a complete stop before exiting the
tractor.
11. DISCONNECTING WINDROWER FROM THE TRACTOR
DANGER!
Always shut the Tractor completely down, place the transmission in park, and set the parking
brake before you or anyone else attempts to connect or disconnect the Implement and
Tractor hitches.
Before disconnecting the implement, the PTO must be disengaged and drum rotation at a complete stop. Move
the implement to a level storage location and lower the implement to the ground. If the implement is not resting
securely on the ground, block the implement up securely before attempting to disconnect it from the tractor.
Use extreme care to keep feet and hands out from under the implement and clear of any pinch points when
disconnecting the implement from the tractor.
SRW800 07/03
© 2003 Alamo Group Inc.
OPERATION
(S3PT-15)
Operation Section 4-27