Transporting The Skid Steer And Windrower; Transporting Skid Steer On Public Roadways - Schulte SMR-600 Operator's Manual

Multi-rake

Table of Contents

Periodically inspect all moving parts for wear and replace when

necessary with authorized service parts. Look for loose fasteners, worn

or broken parts, and leaky or loose fittings. Make sure all pins have

cotter pins and washers. Serious injury may occur from not maintaining

this machine in good working order.

12. TRANSPORTING THE SKID STEER AND WINDROWER

Inherent danger of operating the skid steer and windrower and the possibility of accidents are not left behind

when you finish windrowing an area. One must also use good judgement and safe operation practices when

transporting the skid steer and windrower between locations, By using good judgement and following safe

transport procedures, the possibility of accidents while moving between locations can be substantially

minimized.

Never allow children or other persons to ride on the Power Unit or

Implement. Falling off can result in serious injury or death.

If equipped with a floating mount, ensure the locking pin is securely in place before

transporting.

Before transporting the skid steer and windrower, idle the skid steer engine, disengage the auxiliary hydraulics

and wait for all implement moving parts to cone to a complete stop. When transporting, only raise the

implement enough to clear ground obstacles. Never raise the windrower to a height that impairs the operator's

vision to the front of the windrower

Never allow children or other persons to ride on the Power Unit or

Implement. Falling off can result in serious injury or death.

Make certain that the "Slow Moving Vehicle" (SMV) sign is installed in such a way as to be

clearly visible and legible. When transporting the Equipment use the Power Unit flashing

warning lights and follow all local traffic regulations.

SMR-600 04/21

OPERATION

(SG-21)

Operation Section 4-22

(SPU-16)

(SPU-13)

Table of Contents