98 | DR 100s | Basic Workflow
Charging a DR detector battery
Depending on the configuration, the grid holder includes a charger for a
specific model of DR detector batteries.
To charge a DR detector battery:
1. Insert the battery in the charger.
2. Lock the battery in place if it has a fixation mechanism.
Figure 44: Charging a DR detector battery
The DR detector battery is being charged while the mobile X-ray unit is in
operation or while it is connected to the mains power.
Battery charger indicator lights
Depending on the configuration, the battery charger has three or four
indicator lights.
Table 14: Battery status display
Label Light
0411D EN 20220627 1040
Status
Green blink-
The battery is being charged.
ing
Battery charge level 0-25%.
The battery is being charged.
Battery charge level 25-50%.
The battery is being charged.
Battery charge level 50-75%.