Removing An Rfid Key Card From The Configuration Of The Rfid Reader - AGFA DR 100s User Manual

Removing an RFID key card from the configuration of the
RFID reader
Only users who have a Windows administrator account can perform this task.
1. Go to the Windows Start menu > Agfa and click RFID Config Tool.
The RFID Configuration Tool dialog is displayed.
2. Select the user's RFID key from the list of configured RFID keys.
The configuration of the RFID key is displayed.
3. Click Remove.
4. Click Send to Device.
5. Close the RFID Configuration Tool.
The RFID key cannot be used to start the system anymore.
DR 100s | Advanced Operation | 143
0411D EN 20220627 1040