Table of Contents
Advertisement
Locking bar
2.
• Push the handlebar softly with both hands to drive forward.
• Pull the handlebar softly with both hands to drive backward.
• The speed is proportional to the stress on the handle for the transport.
• In secured position, the equipment can be moved to a max speed of
5 km/h forward and 2.5 km/h backward.
• In working position, the equipment can be moved to a max speed
of 2.5 km/h both forward and backward.
• Apply different pressure on the left and the right to steer the unit.
• When reversing the movement, the equipment could turn a bit on a
side, according to the position of the front wheels.
3. For stopping the equipment, push or pull the handle in reverse to the
movement direction till it stops. Then release the locking bar.
By releasing the locking bar without decreasing the push on the handle,
the equipment stops immediately.
DR 100s | Basic Workflow | 85
0411D EN 20220627 1040
Advertisement
Table of Contents
