Modifying The Access Code - AGFA DR 100s User Manual

136 | DR 100s | Advanced Operation

Modifying the access code

1. Shut down the system.
2. Press and hold the power button until the green status indicator light
starts blinking.
3. Press and hold the enter button until the blue status indicator light starts
blinking.
4. Dial the access code and press the enter button.
The blue status indicator light is lit.
5. Press and hold the number 2 button until the blue status indicator starts
blinking fast.
6. Dial the new four digit access code and press the enter button.
The green status indicator light is blinking.
The new access code replaces the original access code.
0411D EN 20220627 1040