Diagnostic Test; Self Test Operation Example - Toshiba B-EP2DL Series System Mode Manual

4. SYSTEM MODE (For Service Persons and System Administrators)

4.2 Diagnostic Test

In the Self-diagnostic test mode, the printer automatically checks and prints out the printer system
information such as the sensor status or interface, and the maintenance counter. Also it performs a print
head broken element check, LED check, LCD check and beep check.

4.2.1 Self Test Operation Example

Power OFF
[FEED] and [Power] Keys
<0>SHUTDOWN
[PAUSE]
<1>DIAGNOSTIC
[POWER]
MAINTENANCE CONT
[POWER]
CHECKING & PRINT
<1>DIAGNOSTIC
[POWER]
AUTO DIAGNOSTIC
[POWER]
CHECKING & PRINT
<1>DIAGNOSTIC
While holding down the [FEED] key, press the [POWER] key to turn the
power on.
System mode menu display (Shutdown)
System mode menu display (Diagnostic)
Print mode for maintenance counter values and various parameter values
Start of check on maintenance counter values and various parameter values
The results are printed out.
System mode menu display (Diagnostic)
Automatic self-test mode
Start of automatic self-test
The results are printed out.
System mode menu display (Diagnostic)
4- 3
EO13-33005
4.2 Diagnostic Test