Service.book : Chap9.doc 189 Thu Jul 25 11:01:09 1996
Displaying PIM Information
The pim command allows you to display the most
recent PIM information for the specified fault type. To
display PIM information for a specific fault, from the
Service Menu, type the following at the prompt:
ServiceMenu:Entercommand>
You can use pim in the following ways:
pim - gives all fault types
pim 0 - HPMC information on processor
pim 0 fault_type - fault type information on
processor
Boot Console Interface
Displaying PIM Information
pim processor_number
189