Determining Lan Id - HP Visualize b160L Supplementary Manual

Chap5.doc 114 Thu Jul 25 10:24:29 1996
Hardware Station
Path
2.0.2
Field Replaceable Units
FRU Removal and Replacement

Determining LAN ID

Enter the following at the prompt:
/usr/sbin/lanscan
The output is similar to the following:
Dev Hardware Net-Interface NM Encapsulation Mjr
Address lu State
0x08000970ECC0 0 UP
An alternative way to find the system's LAN ID is to
use the following command at the information menu
of the Boot Console Handler:
lanaddress
The "Station Address" represents the EtherLAN ID
(ignore the "0x" in the number).
After you install the new CPU board and power on the
system for the first time, you are prompted for the
LAN ID. Record the information here so you have a
record of it:
EtherLAN ID _____________-_____________
You must supply the dash (-) between the first six dig-
its and the last six digits.
114
NameUnit State ID Methods
lan0 UP 4 ETHER
Num
52