Removing The Storage Tray Cover - HP Visualize b132L Owner's Manual

B_configure.doc 118 Thu Jul 11 10:48:31 1996
Figure 27
Changing Your Workstation's Hardware Configuration
Installing Storage Devices

Removing the Storage Tray Cover

To remove the storage tray cover press in the two cover locking tabs then lift
the front end of the cover and slide it forward off of the pins in the rear, as
shown in Figure 27.

Removing the Storage Tray Cover

Proceed to one of the following subsections to install your storage device in
the disk tray:
• Installing a CD-ROM or a DDS-Format Tape Drive
• Installing a Floppy Drive
• Installing a Hard Disk Drive in Position 2 (Front Position)
• Installing a Hard Disk Drive in Position 1 (Rear Position)
118