Setting The Monitor Type - HP Visualize b132L Owner's Manual

D_boot_cons.doc 203 Thu Jul 11 10:49:34 1996

Setting the Monitor Type

You can set the monitor type for a graphics adapter by typing the following:
Configuration Menu: Enter command >
Where n is the number of the graphics adapter and tt is the monitor type.
To display a list of supported monitors, enter the following command;
Configuration Menu: Enter command >
A list of valid monitor types similar to the following is displayed;
MONITOR INFORMATION
Path Slot Head Type
---- ---- ---- ---- ---------
GRAPHICS(0) 0 1 1 1280x1024
GRAPHICS(0) 0 1 2 1280x1024
GRAPHICS(0) 0 1 3 1280x1024
GRAPHICS(0) 0 1 4 1280x1024
GRAPHICS(0) 0 1 5
GRAPHICS(0) 0 1 6
GRAPHICS(0) 0 1 7
GRAPHICS(0) 0 1 8 1600x1200
GRAPHICS(0) 0 1 9 1600x1200
GRAPHICS(0) 0 1 10 1200x1600
GRAPHICS(0) 0 1 11 1200x1600
GRAPHICS(0) 0 1 12 1280x1024
GRAPHICS(0) 0 1 13 1280x1024
GRAPHICS(0) 0 1 14
GRAPHICS(0) 0 1 15 --------user defined-------
Configuration Menu: Enter command >
The Boot Console Interface
Displaying and Setting the Monitor Type
Size Freq Class
---- -----
75Hz VESA
75Hz VESA,Double buffered
75Hz VESA,Greyscale
75Hz VESA,Double buffered,Greyscale
1024x768 75Hz VESA
800x600 75Hz VESA
640x480 75Hz VESA
75Hz VESA
75Hz VESA,Greyscale
75Hz VESA
75Hz VESA,Greyscale
72Hz
72Hz Double buffered
640x480 60Hz
monitor graphics(n) tt
monitor list
203