Replacing The Storage Tray Cover - HP Visualize b132L Owner's Manual

B_configure.doc 130 Thu Jul 11 10:48:31 1996
Figure 39
Changing Your Workstation's Hardware Configuration
Installing Storage Devices

Replacing the Storage Tray Cover

Perform the following procedure to replace the storage tray cover, as shown
in Figure 39:
Slide the cutouts on the rear of the cover onto the pins on the storage tray
1
Swing the cover into place.
2
Press down on the front edge of the cover to make sure that the locking
3
tabs on the storage tray fully engage the cover.
Replacing the Storage Tray Cover
4 If you removed the storage tray, continue with the next section Replacing the
Storage Tray on page 131.
If you did not remove the storage tray, follow the instructions in Replacing the
Main Tray Assembly on page 110.
130
.