Disconnecting The Storage Tray Assembly - HP Visualize b132L Owner's Manual

B_configure.doc 155 Thu Jul 11 10:48:31 1996
Figure 58
3 Disconnect the cables from the system board and the optional fast, wide SCSI
adapter, as shown in Figure 58.
When disconnecting the floppy cable use the following procedure:
a Lift the locking ring on the connector to the up, or unlocked position.
b While holding the locking ring in the unlocked position, pull the cable out of
the connector.
4 Remove the storage tray retaining screw, as shown in Figure 58.
FWSCSI
SESCSI
Storage Tray
Power
CD Audio
Floppy Connector

Disconnecting the Storage Tray Assembly

Changing Your Workstation's Hardware Configuration
Replacing the Battery
155