Replacing The Floppy Drive And Carrier - HP Visualize b132L Owner's Manual

B_configure.doc 127 Thu Jul 11 10:48:31 1996
Figure 36
7 Replace the floppy and its carrier by setting the mounting pins near the front of
the storage tray in place first, then push the carrier toward the front of the storage
tray slightly and set the rear mounting pins in place.

Replacing the Floppy Drive and Carrier

8 Push down firmly on the rear of the floppy carrier to ensure that it is fully locked
in place.
Changing Your Workstation's Hardware Configuration
Installing Storage Devices
127