Installing A Pci, Eisa, Or Gsc Option Board - HP Visualize b132L Owner's Manual

B_configure.doc 151 Thu Jul 11 10:48:31 1996
Figure 54
3 Slide the board into the slot, as shown in Figure 54.
4 Press in firmly on both ends of the option board at the same time to make sure
that it is firmly seated in the backplane connector.
5 Use the blank plate retaining screw to secure the option board, as shown in
Figure 54.

Installing a PCI, EISA, or GSC Option Board

Changing Your Workstation's Hardware Configuration
Installing a PCI, EISA, or GSC Option Board
151