Replacing The Storage Tray Cover - HP Visualize b132L Owner's Manual

B_configure.doc 166 Thu Jul 11 10:48:31 1996
Figure 68
Changing Your Workstation's Hardware Configuration
Installing the Optional Fast Wide SCSI Controller
Slide the cutouts on the rear of the storage tray cover onto the pins on the
10
storage tray swing the cover into place, as shown in Figure 68.
and
Press down on the front edge of the cover to make sure that the locking
11
tabs on the storage tray fully engage the cover.

Replacing the Storage Tray Cover

12 If you are not connecting any external devices to the external FW SCSI connector
you must connect the FW SCSI terminator.
13 Follow the instructions in Replacing the Main Tray Assembly on page 110
166