B_configure.doc 111 Thu Jul 11 10:48:31 1996
Reconnect the power cables and any other cables or terminators that you
4
disconnected when opening the workstation.
Power on the monitor, any peripheral devices, and the system unit.
5
If you installed a new hard disk drive, go to Configuring a Hard Disk Drive
on page 133.
If you installed a new removable media device, refer to the following chap-
ters for information on using the device:
•
Chapter 2 - Using Your CD-ROM Drive
•
Chapter 3 - Using Your Digital Data Storage (DDS) Tape Drive
•
Chapter 4 - Using Your 3.5-inch Floppy Drive
Changing Your Workstation's Hardware Configuration
Replacing the Main Tray Assembly
111