Removing the Top Cover, Front Bezel, and Mid-Tray
Removing the top cover is necessary to gain access to internal components such as:
•
mass storage devices
•
PCI or EISA cards
Removing the front bezel is necessary to gain access to internal components such as:
•
front fans
•
mid-tray removal
Removing the mid-tray is necessary to gain access to internal components such as.
•
power supply
•
backplanes
•
internal cabling
Preliminary Requirements
Before you remove the top cover perform the following:
1
Shut down any applications.
2
Shut down the Operating System.
3
Refer to the owner's guide, for information on properly shutting down HP-UX.
4
Turn off power to the Model 745.
5
Set up a static-free work place.
6
Disconnect all cables to the system.
Removing the Top Cover, Front Bezel, and Mid-Tray
5-25