Common Problems And Solutions; Problems With Powering Up The System; Power Up Problems - HP Visualize b132L Owner's Manual

solve_probs.doc 77 Thu Jul 11 10:47:35 1996
Table 7
The power LED does not
light.
The power LED lights,
but the screen is blank or
flickers.
If the problem persists, contact your system administrator or call your designated service
representative.

Common Problems and Solutions

The tables in this section list common problems you may encounter with
your workstation. The tables also tell you what to do to help solve the prob-
lems.

Problems with Powering Up the System

Table 7 describes possible problems you may encounter when powering up
the system and offers possible solutions.

Power Up Problems

Problem
Make sure all AC power cables are connected securely to
the system.
Make sure the power cord is plugged into a working AC
outlet.
Make sure the power switch is set to the ON position.
Press the brightness control on the monitor to adjust it. If
the screen is still blank, turn off the system and monitor
power switches. When the system is completely powered
off, check the video cable connections.
Go to the section "Changing Your Monitor Type" in Appen-
dix B for information about displaying and setting your
workstation's monitor configuration.
Solving Problems
Common Problems and Solutions
Solution
77