Removing I/O Cards; Figure 5-6 I/O Slot Numbering - HP Visualize B1000 Owner's Manual

Figure 5-6
Note that the six I/O slots as seen from the back of the computer are
labeled from top to bottom starting with one. See Figure 5-6.
I/O Slot Numbering
I/O Slot 1
I/O Slot 6

Removing I/O Cards

You will need a T-15 Torx driver or flathead screwdriver to remove the
I/O slot bulkhead screws.
Here are the steps required for remove an I/O card from the system unit.
1. Power off the system, and unplug the system unit power cord from
the electrical outlet. Note that when you press the system power
switch, the system automatically performs a shutdown -q.
2. Open the side panel of the system unit as explained in the section
"Opening the Left Side Panel of the System Unit" in this chapter.
Chapter 5
Changing Your Computer Hardware Configuration
I/O Cards
107