Closing The Left Side Panel Of The System Unit - HP Visualize B1000 Owner's Manual

Changing Your Computer Hardware Configuration
Left Side Panel of the System Unit

Closing the Left Side Panel of the System Unit

Perform these steps to close the left side panel.
1. Hold the left side panel so that the top and bottom hinge hooks can be
inserted into their hinge slots. See Figure 5-2. Note that the hinge
slots are located on the far right edge of the system unit (using the
back of the system unit as the reference).
2. Swing the back edge of the panel toward the system unit's back edge
and press the outside edges of the side panel tightly against the
system unit. This will ensure a tight seal of the EMI gaskets.
3. Secure the side panel in place with the two T-15 Torx thumbscrews
you previously removed, and tighten them using 6 inch-pounds of
torque.
102 Chapter 5