Figure 5-48 Removing Memory Cards - HP Visualize B1000 Owner's Manual

Visualize b class and c class
Hide thumbs Also See for Visualize B1000:
Table of Contents

Advertisement

Changing Your Computer Hardware Configuration
Memory Cards
4. Press downward on the ejector tabs located on both sides of the
Figure 5-48
Removing Memory Cards
Notches
5. Lift up evenly on the outside edges of the DIMM card to remove it.
6. Install the remaining DIMM cards in the correct order. See Figure
7. Replace the hard disk drive fan as explained in the section "Replacing
8. Replace the left side panel as explained in the section "Closing the
9. Verify that this removal was successful by following the steps in
158
DIMM connector. See Figure Figure 5-48. This raises the DIMM card
for easy extraction.
See Figure 5-48.
5-45.
the Hard Disk Drive Fan" in this chapter.
System Unit after Propping Up the Power Supply" in this chapter.
Plug the power cord back in to the electrical outlet.
Chapter 6 of this book, "The Boot Console Interface." Note that you
can also use SAM and select the Performance Monitor icon, then
the System Properties icon, and in the window that appears, select
the tab labeled Memory.
Ejector Tab
Chapter 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents