Figure 5-42 Removing The Hard Disk Drive From Its Bracket - HP Visualize B1000 Owner's Manual

Visualize b class and c class
Hide thumbs Also See for Visualize B1000:
Table of Contents

Advertisement

Changing Your Computer Hardware Configuration
Hard Disk Drives
3. Remove the four T-15 Torx shoulder screws from the hard disk drive
Figure 5-42
Removing the Hard Disk Drive from Its Bracket
146
and bracket. See Figure 5-42. You should be careful when removing
the hard disk drive from its mounting bracket to avoid damaging it.
Note that in order to remove the T-15 Torx screws from the sides of
the hard disk drive you will have to have a T-15 Torx driver that is
long enough to fit through the access holes on the sides of the hard
disk drive bracket.
Hard Disk
Drive
Mounting
Grommet
(do not remove)
T-15 Torx
Should Screw
Hard Disk
Drive Mounting
Screw Access
Hole
Hard Disk Drive
Bracket
Plastic Release
Hook
Plastic Release
Lever
Chapter 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents