Scsi Connectors; Power Cord Connector - HP Visualize B1000 Owner's Manual

System Overview
System Unit Rear Panel Connectors

SCSI Connectors

Use the SCSI connectors to connect external SCSI devices such as
DDS-format tape drives. Consult the documentation that accompanies
each SCSI device for specific information concerning its use. Refer to the
chapter "SCSI Connections" for information about connecting SCSI
devices to your computer.
NOTE When attaching external Ultra Narrow Single-Ended SCSI (NSE SCSI)
and Ultra2 Wide Low-Voltage Differential SCSI (LVD SCSI) devices, be
sure to terminate the last device on the external SCSI bus with a
terminator appropriate for that bus. Note that terminators for the LVD
SCSI bus and the NSE SCSI bus are shipped with your product.

Power Cord Connector

Plug the workstation's power cord into the power cord connector to
provide AC power to the system.
34 Chapter 1