HP Visualize B1000 Owner's Manual page 57

6. Double click on the Disk Devices icon.
The following screen message is displayed:
Scanning the system's hardware...
The Disk and File Systems window opens containing a list of
devices installed in this system. From the list of devices, choose the
CD drive you would like to configure as a file system by clicking on
the device to highlight it.
7. Click on Add in the Actions menu. For this example you will select
the item Not Using the Logical Volume Manager. However, you
can select any appropriate item from the Actions menu.
8. Enter the mount directory name (for example, /disk1) in the Mount
Directory field of the Add Disk without LVM window.
9. Click on the Modify Defaults... button. In the Modify Defaults
window, select the Read Only item from the Access button menu.
Next, unselect the Create New File System item by clicking on it.
Exit the Modify Defaults window by clicking on the OK button.
10. Click on the OK button in the Add Disk without LVM window. You
will need to wait for a short time for the CD to be mounted. When the
Add Disk without LVM window disappears and CDFS appears in
the Use column of the Disk and File Systems window, you have
mounted the CD.
Chapter 2
Using Your CD Drive
Mounting and Unmounting a CD
57