Cd-Rom Drive; Removing The Cd-Rom Drive; Figure 9-4 Removing The Cd-Rom Drive - Sun Microsystems SPARCstation 4 110 Service Manual

9.2

CD-ROM Drive

9.2.1

Removing the CD-ROM Drive

1. Shut down and power off the system.
See Section 6.1 "Powering Off the System" on page 6-1.
2. Remove the cover and attach a wrist strap.
See Chapter 7.
3. Disconnect the CD-ROM SCSI, DC power, and audio cable (if present) from the
CD-ROM drive.
Leave the cables plugged in to the system board.
4. Push the CD-ROM drive toward the edge of the chassis to disengage it.
See
FIGURE 9-4
5. Lift the drive out of the chassis and place it on an antistatic surface.
FIGURE 9-4
.
Removing the CD-ROM Drive
Audio cable
(option)
Chapter 9
DC power
cable
CD-ROM
SCSI cable
Storage Devices 9-5