Tests The Post Runs - Sun Microsystems SPARCstation 4 110 Service Manual

2. At the other Sun workstation, add the following lines to the file /etc/remote:
hardwire:\
3. In a Shell Tool window on the Sun workstation, type tip hardwire. (Some
commands will not work properly in a Command Tool window.)
The system will reply connected.
hostname% tip hardwire
connected
The Shell Tool window is now a tip window directed to the Sun workstation serial
port.
4. When you are finished running POST and want to disconnect the tip window,
either type ~. (tilde period) in the tip window, or type kill -9 and the process
ID number of the tip hardwire process.
hostname% ~.
or
hostname% kill -9 PID# of tip hardwire process
3.5

Tests the POST Runs

Following is a sample listing of the Full Diagnostic Mode tests completed
by POST.
CODE EXAMPLE 3-1
MMU Context Table Reg Test
MMU Context Register Test
MMU TLB Replace Ctrl Reg Tst
MMU Sync Fault Stat Reg Test
MMU Sync Fault Addr Reg Test
MMU TLB RAM NTA Pattern Test
MMU TLB CAM NTA Pattern Test
MMU TLB LCAM NTA Pattern Test
IOMMU SBUS Config Regs Test
IOMMU Control Reg Test
3-6 SPARCstation 4 Model 110 Service Manual • July 1996
:dv=/dev/ttya:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
Tests POST Runs