Figure 11-19 Dsimm Slot Locations On The System Board; Figure 11-20 Ejecting The Dsimm - Sun Microsystems SPARCstation 4 110 Service Manual

FIGURE 11-19
5. To eject the faulty DSIMM, press down on the ejection levers on both sides of the
DSIMM connector.
See
FIGURE 11-20
FIGURE 11-20
6. Holding the DSIMM by its edges, remove it from the slot and place it on an
antistatic surface.
11-18 SPARCstation 4 Model 110 Service Manual • July 1996
Rear Panel
DSIMM Slot Locations on the System Board
.
Push down ejector
levers to eject VSIMM
Ejecting the DSIMM
Slot 4
Slot 3
Slot 2
Slot 1
Slot 0
.