Figure 11-16 Connecting The Cd-Rom Audio Cable - Sun Microsystems SPARCstation 4 110 Service Manual

6. Feed the CD-ROM audio cable beneath the metal shield and connect it to its
matching connector on the Audio Module.
The connectors are keyed to install in one way only.
Metal
shield
FIGURE 11-16
7. Secure the audio cable in the retaining hooks on the card guide.
Center the taped part of the cable between the retaining hooks.
8. Press the audio cable into the slot on the side of the Audio Module.
11-14 SPARCstation 4 Model 110 Service Manual • July 1996
Connecting the CD-ROM Audio Cable
Audio cable
Audio cable connector