Figure 8-6 Removing The Speaker - Sun Microsystems SPARCstation 4 110 Service Manual

FIGURE 8-6
9. Unplug the speaker/LED cable from the system board.
See
FIGURE 8-3
Caution – Disconnect the speaker/LED cable from the system board before
disconnecting the cable from the speaker. Failure to first disconnect the speaker/
LED cable from the system board can result in permanent damage to your system.
10. Hold the speaker in one hand and disconnect the two fast-on connectors from the
speaker terminals on the back of the speaker.
See
FIGURE 8-7
11. Set the speaker aside.
8-10 SPARCstation 4 Model 110 Service Manual • July 1996
Removing the Speaker
.
.