Figure 8-22 Cd-Rom Drive Dc Power Connector Location - Sun Microsystems SPARCstation 20 Service Manual

Note: Cable restraints and SCSI data
cables are not illustrated.
FIGURE 8-22
2. Connect the fan DC power connector to the CD-ROM drive DC power connector
(
FIGURE 8-23
Note – Connectors and terminals are keyed to ensure proper connection.
3. Place the excess cable into the cable trough along the front of the chassis
(
FIGURE 8-24
Note – Be sure an adequate amount of two-wire fan DC cable is exposed to allow
fan connection.
80 SPARCstation 20 Service Manual • July 1996
CD-ROM drive
DC power
connector
Front
CD-ROM Drive DC Power Connector Location
).
).
Right side