Nvram/Tod; Removing A Nvram/Tod; Replacing A Nvram/Tod - Sun Microsystems Ultra 1 Series Service Manual
Hide thumbs
Also See for Ultra 1 Series:
- Service manual (218 pages) ,
- Installation manual (61 pages) ,
- Upgrade manual (50 pages)
Table of Contents
Advertisement
this variable to control the frequency of automatic system shutdowns if automatic
shutdown is enabled.
NVRAM/TOD
1. Locate the NVRAM/TOD on the system board.
See Figure 10–9.
Figure 10–9
2. Hold the NVRAM/TOD carrier on both ends and lift it straight up.
Gently wiggle the NVRAM/TOD as necessary.
3. Place the NVRAM/TOD with its carrier on an antistatic surface.
1. Position the replacement NVRAM/TOD on the system board.
See Figure 10–9.
Sun Ultra 1 Series Service Manual ♦ Revision A, November 1995
90
NVRAM/TOD
Advertisement
Table of Contents
