Specifying The Xilinx Prom Device - Xilinx Virtex-5 FPGA ML555 User Manual

R

Specifying the Xilinx PROM Device

Follow these steps to specify the PROM device:
1.
2.
3.
4.
5.
6.
7.
8.
Virtex-5 FPGA ML555 Development Kit
UG201 (v1.4) March 10, 2008
Under Specify Xilinx PROM Device, shown in
♦
From the Number of Revisions drop-down box, choose 2. The XCF32P supports a
maximum of two XC5VLX50T design images.
♦
From the Select a PROM drop-down boxes, choose xcfp and xcf32p, then click
Add.
♦
Click Next.
Figure 4-10: Specify Xilinx PROM Device
Under File Generation Summary, click Finish. Click OK to start adding device files
for Revision: 0.
Under Add Device, browse for the bitfile you want for Configuration Address 0, and
click Open.
Under Add Device → Would you like to add...to Revision:0?, click No.
Browse for the bitfile you want for Configuration Address 1, and click Open.
Under Add Device → Would you like to add...to Revision:1?, click No.
Under Add Device → You have completed the device file entry. Click OK to continue.
Under Available Operations Are, double-click on Generate File.
www.xilinx.com
Platform Flash Image Generation and Programming
Figure 4-10, select the following:
UG201_c4_10_052307
103